Apogee APL-10 Spécifications télécharger pdf (Page 28)

an Apogee Powered Subwoofer to determine its best phase relationship to

the full-range speaker system it is being used with; if the best position turns

out to be reversed, we recommend that you instead reverse the full-range

system(s) with phase reversal adapters, so that the subwoofer(s) can remain

in a positive absolute phase state.

(5) Placement on Tripod Stands

An optional internal stand fitting is available for the APL-220, -500, and -800.

The fitting is contained entirely within the enclosure so that no parts are

exposed. It is made out of high-grade aluminum and is fastened to the enclo-

sure with stainless steel screws. The stand fitting (see figure 7) allows the

APL-220, -500, or -800 to be placed safely and securely on a tripod or mast-

style stand fitting that uses a standard 1.5 inch outside diameter (O.D.) pipe.

A metric stand fitting sized to receive a 35mm O.D. pipe is also available.

For safety reasons, it is important that the tripod or mast-type stand be capa-

ble of supporting the weight of the APL-220 (75 lb. /34 kg), -500 (80 lb. / 36.2

kg), or -800 (94 lb. / 42.6 kg). Generally speaking, only the largest and best-

constructed stands meet this requirement.

STAND FITTING

NUTPLATES

BOTTOM VIEW

Figure 7

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 43 44

Pas de commentaire

Apogee APL-10 Spécifications Page 28