Apogee Duet 2 Manuel d'utilisateur télécharger pdf (Page 12)

Inputs 1 to 4

Inputs 1 to 4 feature built-in pre-amps. These can be configured individually via the four

identical sets of Pre-Amp parameters.

• Level pop-up menu: Sets the respective channel between mic and line inputs. If you

choose the Line option, the +4 dBu and −10 dBV options (shown in the pop-up menu

below) are used to set the reference level of the line input. All mic-related settings—Gain,

Group, Phase Invert, and 48V Phantom Power—are dimmed.

• Gain slider: Sets the gain level of the chosen input (only available for mic channels).

• Group pop-up menu: The gain controls of the mic inputs can be assigned to a group.

Groups link the Gain sliders of mic inputs. Changing the Gain slider of any mic input

assigned to a group also changes the Gain sliders of all mic inputs in the group.

Individual gain relationships (relative levels between mic inputs)—at the time the Gain

sliders were assigned to the group—are retained. Options are Group 1, Group 2, and

None. The Group pop-up menu is only available to channels used as mic inputs.

• Soft Limit checkbox: Select to apply Apogee’s soft limiting to the inputs.

• Phase Invert checkbox: Select this checkbox to reverse the phase of the input signal.

This checkbox can only be activated if the channel is used as a mic input.

• 48V Phantom Power checkbox: Select to activate a 48 volt phantom power supply for

inputs 1 to 4. This checkbox can only be activated if the channel is used as a mic input.

Line Inputs 5 to 8

The Analog Line Input section offers the following parameters for line inputs 5 to 8:

• Level pop-up menu: Sets the input level of line inputs 5 to 8. Options are +4 dBu and

−10 dBV.

• Soft Limit checkbox: Select to apply Apogee’s soft limiting to the analog line inputs.

12 Chapter 1 Using Apogee’s Ensemble

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Pas de commentaire

Apogee Duet 2 Manuel d'utilisateur Page 12